The steel mill reducer is an independent component composed of gear transmission, worm gear transmission, and gear-worm gear transmission enclosed in a rigid housing. Therefore, this device is commonly used as a reduction transmission device between the prime mover and the working mechanism. The steel mill reducer can match the speed and transmit torque between the prime mover and the working mechanism or actuator, and is widely used in modern machinery.

The steel mill reducer reduces the speed while increasing the output torque. The torque output ratio is multiplied by the motor output and the reduction ratio, but it should be noted that it should not exceed the rated torque of the reducer. At the same time, the load inertia is reduced, and the reduction amount of inertia is the square of the reduction ratio. The types of equipment can be divided into general reducers and special reducers, with different design, manufacturing, and usage characteristics. In the 1970s and 1980s, you would find that the technology of reducers in the world had actually developed a lot and was closely integrated with the development of new technological revolutions. The main types of gears are gears, worm gears, and planetary gears. When the steel mill reducer is running, whether it is a servo motor or a stepper motor, the effect is the same. Of course, this is mainly because in many practical applications of motors, it is difficult for us to fully utilize the rated speed of the motor. This involves many other principles based on functional requirements and matching. We will reduce it and reducing through a steel mill reducer is a very common practice. So this is really a wonderful thing. At the same time of reduction, the output torque of the motor can also be correspondingly increased. This function is really good for equipment designers.